LabNation SmartScope USB Oscilloscope

SmartScope is a compact 2-channel USB oscilloscope with a bandwidth of 30 MHz and a sampling rate of 2x 100 MSa/s. It is compatible with all major platforms, including Windows, macOS, Linux, and Android. The operation and display of measurement signals are done via smartphone, tablet, or PC. Additionally, a logic analyzer and a signal generator are integrated.

Even more, you can get mobile with it: take the SmartScope on the road, thanks to the single-cable connectivity. Everything is going to be intuitive: pointing, pinching and swiping finally replaces the clunky interfaces of old scopes.

With the SmartScope you develop your digital interfaces using the 100 MS/s logic analyzer. With this tool you can design any signal you want using Excel, then upload it to the built-in Arbitrary Waveform Generator (AWG). At the end capture the voltage at any point of your design at 100 million times each second.

The Software for the support of Windows / macOS / Linux / Android and Export formats (Excel .csv / Matlab .mat) are given.

Features

Specifications

Oscilloscope
Bandwidth | 30 MHz (-3 dB point)
Sample rate | 2x 100 MS/s
Channels | 2
Max pre-trigger position | 16x full scale
Max post-trigger position | Full scale
Max full voltage scale | 10 V/div (±35 V input range)
Min full voltage scale | 20 mV/div
Analog input range | -35 V, +35 V
Max input peak-to-peak | 40 V
Signal coupling | AC / DC
Precision | 8 bit
Input impedance | 1 MΩ // 10 pF
Waverforms | 200 waveforms/s
Data delay to host | < 10 ms
Sample depth | Up to 4 million samples per channel
External trigger | Yes
Logic Analyzer
Input channels | 8
Input impedance | 100 kOhm // 2 pF to GND
Sample rate | 100 MS/s
Logic level | 1.8 V to 5.0 V
Diode protection | Bidirectional
Input data buffer | 4 million samples
Waverforms | 200 waveforms/s
Data delay to host | < 10 ms
Protocol decoders | I²C, SPI, UART, I²S integrated User extensible
Wave Generator (Analog Output)
Output channels | 1
Data rate | Up to 50 MS/s
Output level | 0-3.3 V (Opamp driven)
Output buffer | Up to 2048 samples
Max slew rate | 30 ns/V
Step | 13 mV
Wave Generator (Digital Output)
Channels | 4
Data rate | Up to 100 MS/s
Output level | 3.3 V or 5 V (selectable)
Output buffer | Up to 2048 samples
Diode protected | Yes
Programmable Logic
USB controller | MicroChip PIC18F14K50
USB interface | PicKit3 or USB flashable
FPGA | Xilinx Spartan 6
FPGA interface | JTAG and USB flashable
Size & Weight
Dimensions (L x W x D) | 110 x 64 x 24.2 mm (4.33 x 2.52 x 0.95")
Weight | 158 g
Case | Aluminium
Connectivity
Device/Host | mini USB included
Record waveforms | Store Matlab (.mat) or Excel (.csv) files through Dropbox
Analog | BNC 2 probes included
Digital | 8x 0.1" pitch, probes (included)
Sync | USB micro B-B
Power | USB micro B (optional)

Included